PostHeaderIcon Clone NRF52840-QIAA-R protected program file

Before any clone NRF52840-QIAA-R protected program file work is quoted, the engineer should confirm which silicon revision is fitted. On the NRF52840-QIAA-R the build code can change how the access port is guarded, so it belongs in the very first record. QIAA-R is the 73-pin aQFN variant with hardware-only access port protection, now listed as not recommended for new designs.

The technical scope of clone NRF52840-QIAA-R protected program file

The nRF52840 is the flagship of this generation, combining a 64 MHz 32-bit ARM Cortex-M4 core with a floating-point unit, 1 Mbyte of flash and 256 Kbytes of RAM. An 8 Kbyte or larger bootloader region supports dual-bank DFU, so its configuration deserves a separate entry in any archive manifest. A 2.4 GHz multiprotocol radio covers Bluetooth Low Energy 5.x, Thread, Zigbee and proprietary modes, while an NFC-A tag supports touch-to-pair. Arm TrustZone isolation and an Arm CryptoCell-310 security subsystem provide a root of trust, secure key storage and side-channel-hardened cryptographic acceleration. Forty-eight GPIOs, EasyDMA and the Programmable Peripheral Interconnect complete a platform intended for gateways and complex peripherals. A revision suffix that changes the access-port behaviour deserves its own line in the written scope.

Application image and configuration page

Program storage is 1 Mbyte of flash in 4 Kbyte pages with 256 Kbytes of RAM, large enough for a dual-bank DFU bootloader, a SoftDevice and a substantial application. The Master Boot Record, SoftDevice S140, application, bootloader and UICR occupy distinct regions, and a flash access control list can restrict which regions code may touch. The UICR page holds APPROTECT, the bootloader address and customer configuration words, while the QSPI interface maps external memory into a separate address window. The surrounding Cortex-M and wireless material is linked here: NRF52840-QIAA-F-R firmware documentation.

Debug-port lock and recovery path

Item What the data sheet states
Core 64 MHz ARM Cortex-M4 with FPU, 32-bit
Program memory 1 Mbyte of flash, 4 Kbyte page granularity
RAM 256 Kbytes of RAM
Radio 2.4 GHz BLE 5.x / 802.15.4, NFC-A, +8 dBm
Package 73-pin aQFN (7×7 mm), 48 GPIOs
Protection APPROTECT in UICR (hardware + software on -F), CTRL-AP ERASEALL
Debug / programming Serial Wire Debug (SWD), CTRL-AP control access port

Access port protection is driven by APPROTECT in the UICR, and on the F revision it is enforced by hardware and software together so a reset or wake re-enables it even after a temporary disable. The CryptoCell-310 engine, TrustZone partitions and the secure-boot root of trust are application security features, not a service backdoor into protected memory. The non-F QIAA build is listed as not recommended for new designs because its APPROTECT is hardware-controlled only, a distinction worth recording in an identification report. Related device notes on this site cover the wider family: NRF52820-QDAA-R firmware documentation.

Peripherals that identify a build

A full-speed USB 2.0 device controller at 12 Mbps, a 32 MHz QSPI interface, a high-speed 32 MHz SPI port and an NFC-A tag with wake-on-field sit alongside four PWM units, I2S, PDM and a 12-bit 200 ksps ADC with eight channels. The QSPI window maps external flash into a separate address range, which a flat binary export would silently drop. Endpoint allocation, the QSPI memory map, NFC pairing records and the secure-boot configuration belong in a complete software archive, not just the executable program. Because the FPU and DSP instructions are available, a captured image has a distinctly richer instruction mix than the smaller tiers. A locked chip still reports its identity, its memory size and its protection state, which is enough for a defensible archive comparison. For background on a neighbouring part, see NRF52820-CFAA-D-R7 firmware documentation.

Revision, container and package codes

The 7 by 7 mm 73-pin aQFN body with 48 GPIOs is the standard package for this flagship, and the QIAA prefix identifies it. Nordic’s product change notification for the QIAA to QIAA-F transition records that change, and the older hardware-only build is now marked not recommended for new designs. On the aQFN body the full supply range including high-voltage mode is available, and the ball-free lead frame makes rework notes simpler than a wafer-level part. The ARM and Nordic cross-reference is documented in Attack locked stm32g474ret6 program.

How an engagement is concluded

Within the second generation this is the top tier, sharing the 64 MHz Cortex-M4 architecture and the CTRL-AP toolchain with the 192 Kbyte and 256 Kbyte members but adding an FPU, TrustZone and CryptoCell-310. A board built for the flagship cannot simply accept a smaller tier, because the memory map, the QSPI window and the security features differ. Because the F revision re-enables APPROTECT on reset, an identification report should record the build code before any tool is connected. Where APPROTECT is set we supply an identification and documentation package and state plainly that a CTRL-AP ERASEALL destroys the application, UICR and RAM together. A comparable recovery note is Attack protected stm32f469zgh6 EEPROM.

For clone NRF52840-QIAA-R protected program file the first deliverable is always documentation: the marked ordering code, the reported flash and RAM sizes, the protection field and the release-archive comparison. Only where a clean read is possible do we return labelled program and configuration files; otherwise the handover is an identification package with the destructive recovery path explained in writing. Work is scoped under NDA for legitimate owners, and no quotation covers a bypass of the protection field.

Comments are closed.