PostHeaderIcon Recover Mcu TS80C54X2 Flash

We can Recover Mcu TS80C54X2 Flash, please view the Mcu TS80C54X2 features for your reference:

TS80C54/58X2 is high performance CMOS ROM, OTP and EPROM versions of the 80C51 CMOS single chip 8-bit mcu. The TS80C54/58X2 retains all features of the Atmel Wireless & Mcus 80C51 with extended ROM/EPROM capacity (16/32 Kbytes), 256 bytes of internal RAM, a 6-source , 4-level interrupt system, an on-chip oscilator and three timer/counters.

In addition, the TS80C54/58X2 has a Hardware Watchdog Timer, a more versatile serial channel that facilitates multiprocessor communication (EUART) and a X2 speed improvement mechanism.

The fully static design of the TS80C54/58X2 allows to reduce system power consumption by bringing the clock frequency down to any value, even DC, without loss of data before Recover Mcu TS80C54X2 Flash.

The TS80C54/58X2 has 2 software-selectable modes of reduced activity for further reduction in power consumption. In the idle mode the CPU is frozen while the timers, the serial port and the interrupt system are still operating. In the power-down mode the RAM is saved and all other functions are inoperative after Recover Mcu.

80C52 Compatible

8051 pin and instruction compatible

Four 8-bit I/O ports

Three 16-bit timer/counters

256 bytes scratchpad RAM

High-Speed Architecture

40 MHz @ 5V, 30MHz @ 3V

Recover Mcu TS80C54X2 Flash

Recover Mcu TS80C54X2 Flash

X2 Speed Improvement capability (6 clocks/machine cycle)

30 MHz @ 5V, 20 MHz @ 3V (Equivalent to 60 MHz @ 5V, 40 MHz @ 3V)

Dual Data Pointer if Recover Mcu

On-chip ROM/EPROM (16K-bytes, 32K-bytes)

Programmable Clock Out and Up/Down Timer/

Counter 2

Hardware Watchdog Timer (One-time enabled with Reset-Out)

Asynchronous port reset

Interrupt Structure with

6 Interrupt sources

4 level priority interrupt system

Full duplex Enhanced UART before Recover Mcu

Framing error detection

Automatic address recognition

Low EMI (inhibit ALE)

Power Control modes

Idle mode

Power-down mode

Power-off Flag

Once mode (On-chip Emulation)

Power supply: 4.5-5.5V, 2.7-5.5V

Temperature ranges: Commercial (0 to 70oC) and Industrial (-40 to 85oC)

Packages: PDIL40, PLCC44, VQFP44 1.4, PQFP44

F1, CQPJ44 (window), CDIL40 (window)

Comments are closed.