Posts Tagged ‘recover microcontroller source flash’

PostHeaderIcon Recover Microcontroller STM32F105RCT6TR Binary

We can Recover MCU STM32F105RCT6TR Binary, please view below Microcontroller STM32F105RCT6TR features for your reference:

Features

Core: ARM 32-bit Cortex™-M3 CPU

– 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory when Recover Microcontroller

 

LQFP100 14 × 14 mm

LQFP64 10 × 10 mm

access

– Single-cycle multiplication and hardware division

Memories

– 64 to 256 Kbytes of Flash memory

– up to 64 Kbytes of general-purpose SRAM Clock, reset and supply management

– 2.0 to 3.6 V application supply and I/Os

– POR, PDR, and programmable voltage detector (PVD) after Recover Microcontroller

– 3-to-25 MHz crystal oscillator

– Internal 8 MHz factory-trimmed RC

– Internal 40 kHz RC with calibration

– 32 kHz oscillator for RTC with calibration Low power

– Sleep, Stop and Standby modes

– VBAT supply for RTC and backup registers

2 × 12-bit, 1 µs A/D converters (16 channels)

– Conversion range: 0 to 3.6 V

– Sample and hold capability

– Temperature sensor if Recover Microcontroller

– up to 2 MSPS in interleaved mode 2 × 12-bit D/A converters DMA: 12-channel DMA controller

– Supported peripherals: timers, ADCs, DAC, I2Ss, SPIs, I2Cs and USARTs

Up to 10 timers with pinout remap capability

– Up to four 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input

– 1 × 16-bit motor control PWM timer with dead-time generation and emergency stop

– 2 × watchdog timers (Independent and Window)

– SysTick timer: a 24-bit downcounter

– 2 × 16-bit basic timers to drive the DAC Up to 14 communication interfaces with pinout remap capability before Recover Microcontroller

– Up to 2 × I2C interfaces (SMBus/PMBus)

– Up to 5 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)

– Up to 3 SPIs (18 Mbit/s), 2 with a multiplexed I2S interface that offers audio class accuracy via advanced PLL schemes

– 2 × CAN interfaces (2.0B Active) with 512 bytes of dedicated SRAM after Recover Microcontroller

– USB 2.0 full-speed device/host/OTG controller with on-chip PHY that supports HNP/SRP/ID with 1.25 Kbytes of dedicated SRAM

– 10/100 Ethernet MAC with dedicated DMA and SRAM (4 Kbytes): IEEE1588 hardware support, MII/RMII available on all packages

 

Table 1.

 

Device summary

 

– Serial wire debug (SWD) & JTAG interfaces if Recover Microcontroller

 

Reference

 

Part number

 

– Cortex-M3 Embedded Trace Macrocell™

Up to 80 fast I/O ports

– 51/80 I/Os, all mappable on 16 external

interrupt vectors and almost all 5 V-tolerant

CRC calculation unit, 96-bit unique ID after Recover Microcontroller

 

STM32F105xx

STM32F107xx

 

STM32F105R8, STM32F105V8

STM32F105RB, STM32F105VB

STM32F105RC, STM32F105VC

STM32F107RB, STM32F107VB

STM32F107RC, STM32F107VC

PostHeaderIcon Recover Microcontroller 430G2452 Heximal

recover-microcontroller-430g2452-heximal

We can Recover Microcontroller 430G2452 Heximal, please view below Microcontroller 430G2452 features for your reference:

 

FEATURES

Low Supply Voltage Range: 1.8 V to 3.6 V Ultra-Low Power Consumption

– Active Mode: 220 µA at 1 MHz, 2.2 V

– Standby Mode: 0.5 µA

– Off Mode (RAM Retention): 0.1 µA

Five Power-Saving Modes Ultra-Fast Wake-Up From Standby Mode in Less Than 1 µs 16-Bit RISC Architecture, 62.5-ns Instruction Cycle Time when Recover Microcontroller

Basic Clock Module Configurations

– Internal Frequencies up to 16 MHz With

Four Calibrated Frequencies

– Internal Very-Low-Power Low-Frequency (LF) Oscillator

– 32-kHz Crystal

– External Digital Clock Source

One 16-Bit Timer_A With Three Capture/Compare Registers Up to 16 Touch-Sense Enabled I/O Pins after Recover Microcontroller

Universal Serial Interface (USI) Supporting SPI and I2C 10-Bit 200-ksps Analog-to-Digital (A/D)

Converter With Internal Reference, Sample-and-Hold, and Autoscan (MSP430G2x52 Only) On-Chip Comparator for Analog Brownout Detector Serial Onboard Programming, No External Programming Voltage Needed, Programmable Code Protection by Security Fuse On-Chip Emulation Logic With Spy-Bi-Wire Interface Family Members are Summarized:

Package Options

– TSSOP: 14 Pin, 20 Pin

– PDIP: 20 Pin

– QFN: 16 Pin

For Complete Module Descriptions, See the MSP430x2xx Family User’s Guide (SLAU144)

DESCRIPTION

The Texas Instruments MSP430™ family of ultra-low-power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications if Recover Microcontroller. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency before Recover Microcontroller. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs. The MSP430G2x52 and MSP430G2x12 series of microcontrollers are ultra-low-power mixed signal microcontrollers with built-in 16-bit timers, and up to 16 I/O touch sense enabled pins and built-in communication capability using the universal serial communication interface and have a versatile analog comparator before Reverse engineering Microcontroller. The MSP430G2x52 series have a 10-bit A/D converter. For configuration details see Table 1. Typical applications include low-cost sensor systems that capture analog signals, convert them to digital values, and then process the data for display or for transmission to a host system when Recover Microcontroller.

PostHeaderIcon Recover Microcontroller MC68HC908JB16 Firmware

We can recover Microcontroller MC68HC908JB16 Firmware, please view below Microcontroller MC68HC908JB16 features for your reference:

 

Features of the Microcontroller MC68HC908JB16 include the following:

 

High-performance M68HC08 architecture

Fully upward-compatible object code with M6805, M146805, and

M68HC05 families

Low-power design; fully static with stop and wait modes when recover Microcontroller

6-MHz internal bus frequency

16,384 bytes of on-chip FLASH memory with security1 feature

384 bytes of on-chip random access memory (RAM)

Up to 21 general-purpose input/output (I/O) pins, including:

– 15 shared-function I/O pins

– 8-bit keyboard interrupt port

– 10mA high current drive for PS/2 connection on 2 pins (with USB module disabled)

– 1 dedicated I/O pin, with 25mA direct drive for infrared LED (32-pin package) if recover Microcontroller

– 6 dedicated I/O pins, with 25mA direct drive for infrared LED on 2 pins and 10mA direct drive for normal LED on 4 pins (28-pin package)

Two 16-bit, 2-channel timer interface modules (TIM1 and TIM2) with selectable input capture, output compare, PWM capability on each channel, and external clock input option (TCLK) when recover Microcontroller

Universal Serial Bus specification 2.0 low-speed functions:

 

– 1.5Mbps data rate

– On-chip 3.3V regulator

– Endpoint 0 with 8-byte transmit buffer and 8-byte receive buffer

– Endpoint 1 with 8-byte transmit buffer

– Endpoint 2 with 8-byte transmit buffer and 8-byte receive buffer

Serial communications interface module (SCI)

Dual clock generator modules (CGM) (32-pin package)

In-circuit programming capability using USB communication or standard serial link on PTA0 pin after recover Microcontroller

System protection features:

– Optional computer operating properly (COP) reset

– Optional Low-voltage detection with reset

– Illegal opcode detection with reset

– Illegal address detection with reset

Master reset pin with internal pull-up and power-on reset before recover Microcontroller

IRQ interrupt pin with internal pull-up and schmitt-trigger input

32-pin low-profile quad flat pack (LQFP) and 28-pin small outline

integrated circuit package (SOIC)

Features of the CPU08 include the following:

Enhanced HC05 programming model when recover Microcontroller

Extensive loop control functions

16 addressing modes (eight more than the HC05)

16-bit index register and stack pointer

Memory-to-memory data transfers

Fast 8 × 8 multiply instruction

Fast 16/8 divide instruction

Binary-coded decimal (BCD) instructions

Optimization for controller applications

Third party C language support if recover Microcontroller