Posts Tagged ‘vervielfältigen mcu hex’

PostHeaderIcon Copy AVR ATmega161 Firmware

Copy AVR ATmega161 Firmware

Copy AVR ATmega161 Firmware

We can Copy AVR ATMEGA161 Firmware, please view below the feature of AVR ATMEGA161 for our reference:

Features

· High-performance, Low-power AVR® 8-bit Microcontroller

· Advanced RISC Architecture

– 130 Powerful Instructions – Most Single Clock Cycle Execution

– 32 x 8 General Purpose Working Registers

– Fully Static Operation

– Up to 8 MIPS Throughput at 8 MHz

– On-chip 2-cycle Multiplier

Program and Data Memories

– 16K Bytes of Non-volatile In-System Programmable Flash Endurance: 1,000 Write/Erase Cycles

– Optional Boot Code Memory with Independent Lock bits Self-programming of Program and Data Memories

– 512 Bytes of Non-volatile In-System Programmable EEPROM Endurance: 100,000 Write/Erase Cycles

– 1K Byte of Internal SRAM

– Programming Lock for Software Security

Peripheral Features

– Two 8-bit Timer/Counters with Separate Prescaler and PWM

– Expanded 16-bit Timer/Counter System with Separate Prescaler, Compare, Capture Modes and Dual 8-, 9-, or 10-bit PWM after Copy AVR

– Dual Programmable Serial UARTs

– Master/Slave SPI Serial Interface

– Real-time Counter with Separate Oscillator

– Programmable Watchdog Timer with Separate On-chip Oscillator

– On-chip Analog Comparator

Special Microcontroller Features

Power-on Reset

– External and Internal Interrupt Sources

– Three Sleep Modes: Idle, Power-save and Power-down Power Comsumption at 4 MHz, 3.0V, 25°C

– Active 3.0 mA

– Idle Mode 1.2 mA

– Power-down Mode < 1 µA

I/O and Packages

– 35 Programmable I/O Lines

– 40-lead PDIP and 44-lead TQFP Operating Voltages

– 2.7V – 5.5V for the ATmega161L

– 4.0V – 5.5V for the ATmega161 Speed Grades

– 0 – 4 MHz for the ATmega161L

– 0 – 8 MHz for the ATmega161

Commercial and Industrial Temperature Ranges