Posts Tagged ‘genesen integrierte Schaltung data’

PostHeaderIcon Copy AVR ATmega165A

Copy AVR ATmega165A

Copy AVR ATmega165A

We can Copy AVR ATmega165A, please view below the feature of AVR ATmega165A for your reference:

Features

High Performance, Low Power Atmel® AVR® 8-Bit Microcontroller

Advanced RISC Architecture

– 130 Powerful Instructions – Most Single Clock Cycle Execution

– 32 x 8 General Purpose Working Registers

– Fully Static Operation

– Up to 16MIPS Throughput at 16MHz (ATmega165PA/645P)

– Up to 20MIPS Throughput at 20MHz

(ATmega165A/325A/325PA/645A/3250A/3250PA/6450A/6450P)

– On-Chip 2-cycle Multiplier

High Endurance Non-volatile Memory segments

– In-System Self-programmable Flash Program Memory

· 16KBytes (ATmega165A/ATmega165PA)

· 32KBytes (ATmega325A/ATmega325PA/ATmega3250A/ATmega3250PA)

· 64KBytes (ATmega645A/ATmega645P/ATmega6450A/ATmega6450P)

– EEPROM

· 512Bytes (ATmega165A/ATmega165PA)

· 1Kbytes (ATmega325A/ATmega325PA/ATmega3250A/ATmega3250PA)

· 2Kbytes (ATmega645A/ATmega645P/ATmega6450A/ATmega6450P)

– Internal SRAM

· 1KBytes (ATmega165A/ATmega165PA)

· 2KBytes (ATmega325A/ATmega325PA/ATmega3250A/ATmega3250PA)

· 4KBytes (ATmega645A/ATmega645P/ATmega6450A/ATmega6450P)

– Write/Erase cycles: 10,000 Flash/100,000 EEPROM

– Data retention: 20 years at 85°C/100 years at 25°C(1)

– Optional Boot Code Section with Independent Lock Bits

· In-System Programming by On-chip Boot Program

· True Read-While-Write Operation

– Programming Lock for Software Security

– Capacitive touch buttons, sliders and wheels

– Up to 64 sense channels

JTAG (IEEE std. 1149.1 compliant) Interface

– Boundary-scan Capabilities According to the JTAG Standard

– Extensive On-chip Debug Support

– Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface

Peripheral Features

– Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode

– One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode

– Real Time Counter with Separate Oscillator

– Four PWM Channels

– 8-channel, 10-bit ADC

– Programmable Serial USART

– Master/Slave SPI Serial Interface

– Universal Serial Interface with Start Condition Detector

– Programmable Watchdog Timer with Separate On-chip Oscillator

– On-chip Analog Comparator

– Interrupt and Wake-up on Pin Change

Special Microcontroller Features

– Power-on Reset and Programmable Brown-out Detection

– Internal Calibrated Oscillator

– External and Internal Interrupt Sources

– Five Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, and Standby

I/O and Packages

– 54/69 Programmable I/O Lines

– 64/100-lead TQFP, 64-pad QFN/MLF and 64-pad DRQFN

Speed Grade:

– ATmega 165A/165PA/645A/645P: 0 – 16MHz @ 1.8 – 5.5V

– ATmega325A/325PA/3250A/3250PA/6450A/6450P: 0 – 20MHz @ 1.8 – 5.5V

Temperature range:

– -40°C to 85°C Industrial

Ultra-Low Power Consumption (picoPower devices)

– Active Mode:

· 1MHz, 1.8V: 215µA

· 32kHz, 1.8V: 8µA (including Oscillator)

– Power-down Mode: 0.1µA at 1.8V

– Power-save Mode: 0.6µA at 1.8V (Including 32kHz RTC over 20 years at 85°C or 100 years at 25°C