PostHeaderIcon Extract AVR Chip Software & Data

Extract AVR Chip Software Data, the program from flash memory and data from eeprom can be readout from AVR MCU after unlock AVR microcontroller protective fuse bit;

Extract AVR Chip Software & Data, the program from flash memory and data from eeprom can be readout from AVR MCU after unlock AVR microcontroller protective fuse bit

Extract AVR Chip Software & Data, the program from flash memory and data from eeprom can be readout from AVR MCU after unlock AVR microcontroller protective fuse bit

There is another trick that makes recovery of memory contents possible, even when there is no overlap between the erased security fuse and non-corrupted memory content at the time of erasure. For example, we found that newer samples of the same chip will start to corrupt the memory before the security fuse is erased. In this case a power glitch cannot be used to recover information from the memory.

What can be done instead is a careful adjustment of the threshold voltage in the cell’s transistor. It is possible to inject a certain portion of charge into the floating gate by carefully controlling the memory programming time. Normally, the programming of an EPROM memory is controlled by external signals and all the timings should be supplied by a programmer unit.

This gives an opportunity for the attacker to inject charge into the floating gate thus shifting the threshold level enough to read the memory contents when the security fuse is inactive. Such a trick is virtually impossible to apply to modern EEPROM and Flash memory devices for several reasons. First, the programming is fully controlled by the on-chip hardware circuit.

Second, the programming of EEPROM and Flash cells is normally performed by using much faster Fowler-Nordheim tunnelling rather than CHE injection. As a result it is very hard to control the exact amount of charge being placed into the cell. Also, the temperature and the supply voltage affect this process making it even harder to control.

Comments are closed.