PostHeaderIcon Copy AVR ATmega161 Firmware

Copy AVR ATmega161 Firmware

Copy AVR ATmega161 Firmware

We can Copy AVR ATMEGA161 Firmware, please view below the feature of AVR ATMEGA161 for our reference:

Features

· High-performance, Low-power AVR® 8-bit Microcontroller

· Advanced RISC Architecture

– 130 Powerful Instructions – Most Single Clock Cycle Execution

– 32 x 8 General Purpose Working Registers

– Fully Static Operation

– Up to 8 MIPS Throughput at 8 MHz

– On-chip 2-cycle Multiplier

Program and Data Memories

– 16K Bytes of Non-volatile In-System Programmable Flash Endurance: 1,000 Write/Erase Cycles

– Optional Boot Code Memory with Independent Lock bits Self-programming of Program and Data Memories

– 512 Bytes of Non-volatile In-System Programmable EEPROM Endurance: 100,000 Write/Erase Cycles

– 1K Byte of Internal SRAM

– Programming Lock for Software Security

Peripheral Features

– Two 8-bit Timer/Counters with Separate Prescaler and PWM

– Expanded 16-bit Timer/Counter System with Separate Prescaler, Compare, Capture Modes and Dual 8-, 9-, or 10-bit PWM after Copy AVR

– Dual Programmable Serial UARTs

– Master/Slave SPI Serial Interface

– Real-time Counter with Separate Oscillator

– Programmable Watchdog Timer with Separate On-chip Oscillator

– On-chip Analog Comparator

Special Microcontroller Features

Power-on Reset

– External and Internal Interrupt Sources

– Three Sleep Modes: Idle, Power-save and Power-down Power Comsumption at 4 MHz, 3.0V, 25°C

– Active 3.0 mA

– Idle Mode 1.2 mA

– Power-down Mode < 1 µA

I/O and Packages

– 35 Programmable I/O Lines

– 40-lead PDIP and 44-lead TQFP Operating Voltages

– 2.7V – 5.5V for the ATmega161L

– 4.0V – 5.5V for the ATmega161 Speed Grades

– 0 – 4 MHz for the ATmega161L

– 0 – 8 MHz for the ATmega161

Commercial and Industrial Temperature Ranges

Comments are closed.